Woodworking: First-ever cushions project (Part 3)

I left off last week in my seat cushion project having purchased the plywood boards I wanted but without a way to cut them to size. In a complete nonadventure, I purchased the jigsaw blades from amazon.

I had done a lot of research into which blades I needed because jigsaw blades come in many teeth arrangements. I learned that a 10 TPI (teeth per inch) blade is good for plywood, so that’s what I used. I got a multipack, so now I have ample supply. Also I guess there is no immediate need to expand my DeWalt set to include a cordless jigsaw because I have all these U-shank blades. Longtime readers of this blog know how my DeWalt set continues to expand.

Finally equipped with the tools I needed to cut the boards to size, it became a matter of tracing and actually cutting.

Rather than measuring, I used the perfect stencil: the prior seat board! And, lined up, it looked pretty good to me. And I did the same with the other chair so I could knock out

I clamped the board to my table, which is a super important step when cutting so it doesn’t chatter away or get grabbed and stuck in the teeth of the saw and just go out of control.

Then to the cutting. Now, I hadn’t used a jigsaw in I don’t know how long, so I was hopeful that I wouldn’t screw things up. I checked that the blade was firmly in place because, as I mentioned, this is a U-shank blade. A T-shank blade is supposed to snap into place without such concerns. Like how my impact driver bits snap into place for a quick change without having to tighten a chuck. I’ve not used a T-shank jigsaw, but this is my understanding of it.

That went well. Apparently, I have no pictures of the first cuts, but I do for the second board.

Things were looking up. The jigsaw was very easy to use.

I had spent all that time researching how to get pre-cut boards, and all it took to get some in this shape was a few quick cuts.

I was well on my way, sure, but the edges were rough. I had to find a way to chamfer them. But with all my tools, I didn’t have any planes. And I’d long learned my lesson that trying to sand a corner is a tedious process that makes lots of dust and is unreliable for a uniform surface.

I began to research planes. More on that next week.

This entry was posted in Off Topic, Projects and tagged , , , , on by .

About raabidfun

I'm a guy living the #raabidfun lifestyle. I figured I would create a blog about crossword puzzles I do. The idea is to do the NYT crossword and the WSJ crossword daily as much as I can. That includes when I don't finish and have clearly failed. They can be difficult. Also I am not an attorney, and any legal analysis in this blog reflects my interpretation, which means it can be flawed and should not be relied upon for use in legal matters (especially against me).

Leave a Reply